The High Quality, professional grade Canadian made XPO Vvivid Satin Chrome vinyl wrap film from CWS, aka Matte Chrome or Matte Metallic consists of a cast conform chrome vinyl film of 3.9 mils thickness. Due to the composition of the film, the product may be used on curved or textured surfaces. This conform chrome vinyl wrap film specifically suits the requirements needed to conform to a vehicle. The adhesive is specially formulated to conform with the vinyl wrap without losing its bond on the target surface or to the film. The glue offers complete repositionability. Due to its structure, upon heating, forming, stretching; the vinyl will blend over large portions to reduce the chance of stretch-marks caused by aggressive tack or deforming of the vinyl.
Texture: satin semi reflective
Features: VViViD Natural Air release, Centerpoint Technology, VViViD Heat fuse, VViViD Resist.
Area of use: Long-term fleet and motorsport marketing applications. Architectural applications indoor and outdoor.
Adhesive: Acrylic*-based, repositionable, slide-able*.
Skill level needed: Low
Life: (based on vertical surface exposure) 6 years.
PREPARING YOUR SURFACE FOR VVIVID VINYL WRAP INSTALLATION
You can apply your Vvivid films on a wide variety of surfaces. These target surfaces must be clean, dry and free from any surface contaminants such as wax, grease or oils. Even surfaces that appear clean by the eye should be cleaned before application. General-use cleaning product will help clean the larger surfaces. Grease and wax remover will help remove any contaminants left afterwards. Make sure the edges, neighboring panels and any surfaces the vinyl will be applied to is thoroughly cleaned. Just before wrapping a section go-over it again with some Isopropyl alcohol – also known as rubbing alcohol.