CHARACTERISTICS OF ATTACK GRAY MATTE VINYL AKA MATTE ELEPHANT GRAY
The High Quality, professional grade Canadian made Vvivid XPO Matte vinyl wrap from CWS consists of a cast vinyl of 3.4 mils thick film. Due to the composition of the film, the product may be used on straight, curved & complex shaped surfaces. This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint. Great for architectural applications indoor and out. CWS’s vinyl wrap film specifically suits the requirements needed to conform to a vehicle. The adhesive is specially formulated to conform with the vinyl wrap without losing its bond on the target surface or to the film. The glue offers complete repositionability. Due to its structure, upon heating, forming, stretching; the vinyl will blend over large portions to reduce the chance of stretch-marks caused by aggressive tack or deforming of the vinyl.
Thickness: 3.9 mils
Texture: Matte / Flat / Satin
Features: VViViD Natural Air release, Centerpoint Technology, VViViD Heat fuse, VViViD Resist.
Area of use: Long-term fleet and motorsport marketing applications. Architectural applications indoor & outdoor.
Adhesive: Acrylic*-based, reposition able, slide-able*.
Conformability: Very high
Skill level needed: Low
Life: (based on vertical surface exposure) 5-7 years.
PREPARING YOUR SURFACE FOR VVIVID VINYL WRAP INSTALLATION
You can apply your CWS films on a wide variety of surfaces. These target surfaces must be clean, dry and free from any surface contaminants such as wax, grease or oils. Even surfaces that appear clean by the eye should be cleaned before application. General-use cleaning product will help clean the larger surfaces. Grease and wax remover will help remove any contaminants left afterwards. Make sure the edges, neighboring panels and any surfaces the vinyl will be applied to is thoroughly cleaned. Just before wrapping a section go-over it again with some Isopropyl alcohol – also known as rubbing alcohol.