This high quality, professional grade architectural vinyl film for counter top wraps from CWS is a very durable vinyl film used for kitchen, bathroom, office countertops and office furniture or any other application such as walls, stair railings and other decorative surfaces. The architectural vinyl film finish resembles the natural material, making it hard to tell it is not the real marble that is being emulated. They deliver the natural look you want, at the fraction of the cost.
This vinyl wrap film specifically suits the requirements needed to conform to both straight and curved surfaces. The adhesive is specially formulated to conform with the vinyl wrap without losing its bond on the target surface or to the film. Configured for dry application only. Due to its structure, upon heating, forming, stretching; the vinyl will blend over large portions to reduce the chance of stretch-marks caused by aggressive tack or deforming of the vinyl. This product is comparable to 3M DI-NOC architectural vinyl films.
PREPARING YOUR SURFACE FOR KITCHEN VINYL WRAP INSTALLATION
You can apply your CWS films on a wide variety of surfaces. These target surfaces must be clean, dry and free from any surface contaminants such as wax, grease or oils. Even surfaces that appear clean by the eye should be cleaned before application. General-use cleaning product will help clean the larger surfaces. Grease and wax remover will help remove any contaminants. Make sure the edges, neighboring panels and any surfaces the vinyl will be applied to is thoroughly cleaned. Just before wrapping a section go-over it again with some Isopropyl alcohol (rubbing alcohol)for best results.