The High Quality, professional grade Paint Protection Film (PPF) from CWS is a self healing; chip, scratch, abrasion and chemical damage resistant vinyl film. It is 100% translucent, with a gloss finish. Installation to any vehicle, boat or any other surface you like to protect from damage. The vinyl is self-healing; heat from the sun will melt away surface scratches due to a soft layer within the vinyl.
The adhesive is specially formulated to conform with the vinyl wrap without losing its bond on the target surface or to the film. The glue is made for wet application. Due to its structure, upon heating, forming, stretching; the vinyl will blend over large portions to reduce the chance of stretch-marks caused by aggressive tack or deforming of the vinyl.
PREPARING YOUR SURFACE FOR CWS VINYL WRAP INSTALLATION
You can apply your CWS films on a wide variety of surfaces. These target surfaces must be clean, dry and free from any surface contaminants such as wax, grease or oils. Even surfaces that appear clean by the eye should be cleaned before application. General-use cleaning product will help clean the larger surfaces. Grease and wax remover will help remove any contaminants left afterwards. Make sure the edges, neighboring panels and any surfaces the vinyl will be applied to is thoroughly cleaned. Just before wrapping a section go-over it again with some Isopropyl alcohol – also known as rubbing alcohol.